SYSTEM CALLS

• Process Control

Process control is a statistics and engineering discipline that deals with architectures, mechanisms, and algorithms for controlling the output of a specific process. See also control theory.
For example, heating up the temperature in a room is a process that has the specific, desired outcome to reach and maintain a defined temperature (e.g. 20°C), kept constant over time. Here, the temperature is the controlled variable. At the same time, it is the input variable since it is measured by a thermometer and used to decide whether to heat or not to heat. The desired temperature (20°C) is the setpoint. The state of the heater (e.g. the setting of the valve allowing hot water to flow through it) is called the manipulated variable since it is subject to control actions.
A commonly used control device called a programmable logic controller, or a PLC, is used to read a set of digital and analog inputs, apply a set of logic statements, and generate a set of analog and digital outputs. Using the example in the previous paragraph, the room temperature would be an input to the PLC. The logical statements would compare the setpoint to the input temperature and determine whether more or less heating was necessary to keep the temperature constant. A PLC output would then either open or close the hot water valve, an incremental amount, depending on whether more or less hot water was needed. Larger more complex systems can be controlled by a Distributed Control System (DCS) or SCADA system.

In practice, process control systems can be characterized as one or more of the following forms:

Discrete – Found in many manufacturing, motion and packaging applications. Robotic assembly, such as that found in automotive production, can be characterized as discrete process control. Most discrete manufacturing involves the production of discrete pieces of product, such as metal stamping.

Batch – Some applications require that specific quantities of raw materials be combined in specific ways for particular durations to produce an intermediate or end result. One example is the production of adhesives and glues, which normally require the mixing of raw materials in a heated vessel for a period of time to form a quantity of end product. Other important examples are the production of food, beverages and medicine. Batch processes are generally used to produce a relatively low to intermediate quantity of product per year (a few pounds to millions of pounds).

Continuous – Often, a physical system is represented though variables that are smooth and uninterrupted in time. The control of the water temperature in a heating jacket, for example, is an example of continuous process control. Some important continuous processes are the production of fuels, chemicals and plastics. Continuous processes, in manufacturing, are used to produce very large quantities of product per year(millions to billions of pounds).
Applications having elements of discrete, batch and continuous process control are often called hybrid applications.

• File Management

File management is a necessary evil associated with computers. It's really not all that much different than rummaging through a heap of papers on your desk except you don't get paper cuts. In either situation, a bit of organization and using the tools available can make the task easier.

• Device Management

Device Management is a set of technologies, protocols and standards used to allow the remote management of mobile devices, often involving updates of firmware over the air (FOTA). The network operator, handset OEM or in some cases even the end-user (usually via a web portal) can use Device Management, also known as Mobile Device Management, or MDM, to update the handset firmware/OS, install applications and fix bugs, all over the air. Thus, large numbers of devices can be managed with single commands and the end-user is freed from the requirement to take the phone to a shop or service center to refresh or update.
For companies, a Device Management system means better control and safety as well as increased efficiency, decreasing the possibility for device downtime. As the number of smart devices increases in many companies today, there is a demand for managing, controlling and updating these devices in an effective way. As mobile devices have become true computers over the years, they also force organizations to manage them properly. Without proper management and security policies, mobile devices pose threat to security: they contain lots of information, while they may easily get into wrong hands. Normally an employee would need to visit the IT / Telecom department in order to do an update on the device. With a Device Management system, that is no longer the issue. Updates can easily be done "over the air". The content on a lost or stolen device can also easily be removed by "wipe" operations. In that way sensitive documents on a lost or a stolen device do not arrive in the hands of others.

• Information Maintenance

OPERATING SYSTEM SERVICES

Program execution – system capability to load a program into memory and to run it.

I/O operations – since user programs cannot execute I/O operations directly, the operating system must provide some means to perform I/O.

File-system manipulation – program capability to read, write, create, and delete files.

Communications – exchange of information between processes executing either on the same computer or on different systems tied together by a network. Implemented via shared memory or message passing.

Error detection – ensure correct computing by detecting errors in the CPU and memory hardware, in I/O devices, or in user programs.


Additional functions exist not for helping the user, but rather for ensuring efficient system operations.
•Resource allocation – allocating resources to multiple users or multiple jobs running at the same time.
•Preemptable, nonpreemptable resources
•Deadlock prevention and detection models
•Accounting – keep track of and record which users use how much and what kinds of computer resources for account billing or for accumulating usage statistics.
•Protection – ensuring that all access to system resources is controlled.

SOFTWARE COMPONENTS

• Operating System Process Management
  

is an integral part of any modern day operating system (OS). The OS must allocate resources to processes, enable processes to share and exchange information, protect the resources of each process from other processes and enable synchronisation among processes. To meet these requirements, the OS must maintain a data structure for each process, which describes the state and resource ownership of that process, and which enables the OS to exert control over each process.

• Main Memory Management
  

Memory management is the act of managing computer memory. In its simpler forms, this involves providing ways to allocate portions of memory to programs at their request, and freeing it for reuse when no longer needed. The management of main memory is critical to the computer system.
Virtual memory systems separate the memory addresses used by a process from actual physical addresses, allowing separation of processes and increasing the effectively available amount of RAM using disk swapping. The quality of the virtual memory manager can have a big impact on overall system performance.
Garbage collection is the automated allocation, and deallocation of computer memory resources for a program. This is generally implemented at the programming language level and is in opposition to manual memory management, the explicit allocation and deallocation of computer memory resources.

• File Management
  

A file manager or file browser is a computer program that provides a user interface to work with file systems. The most common operations used are create, open, edit, view, print, play, rename, move, copy, delete, attributes, properties, search/find, and permissions. Files are typically displayed in a hierarchy. Some file managers contain features inspired by web browsers, including forward and back navigational buttons.
Some file managers provide network connectivity such as FTP, NFS, SMB or WebDAV. This is achieved either by allowing the user to browse for a server, connect to it and access the server's file system like a local file system, or by providing its own full client implementations for file server protocols.

• I/O System Management
  

Input/output device information management system for multi-computer system
United States Patent 6526441

In a multi-computer system having a plurality of computers, an input/output device configuration definition table and an input/output device configuration reference table are adapted to be collectively managed. A configuration management program manages the configuration definition of all input/output devices of a plurality of computers by using the input/output device configuration definition table, and generates a changed data file when an input/output device configuration is changed. Dynamic system alteration is effected by changing the contents of the input/output device configuration reference table stored in a shared memory, in accordance with the changed data file. The input/output device configuration definition table and the input/output device configuration reference table each have an input/output device information part and an input/output device connection information part arranged in a matrix form to allow addition/deletion of an input/output device and a computer.

• Secondary Storage Management

Secondary storage management is a classical feature of database management systems. It is usually supported through a set of mechanisms. These include index management, data clustering, data buffering, access path selection and query optimization.
None of these is visible to the user: they are simply performance features. However, they are so critical in terms of performance that their absence will keep the system from performing some tasks (simply because they take too much time). The important point is that they be invisible. The application programmer should not have to write code to maintain indices, to allocate disk storage, or to move data between disk and main memory. Thus, there should be a clear independence between the logical and the physical level of the system.

• Protection System

With the new series of ThinkPads IBM introduced the Active Protection System (APS) in 2003. The APS is a protection system for the ThinkPad's internal harddrive. A sensor inside the ThinkPad recognizes when the notebook is accelerated. A software applet then is triggered to park the harddisk. This way the risk of data loss in case of when the notebook is dropped is significantly reduced since the read/write head of the harddrive is parked and hence can't crash onto the platter when the notebook drops onto the floor.
The hardware sensor is capable of not only recognizing acceleration of the notebook, but also (to a certain degree) of its whole orientation in space, relative to gravity's axis. Furthermore, having the actual control put into software, its functionality is extendable and it gives chance to implement features like the "ignore minor shocks" feature which is present in the Windows based control applet. (This feature prevents the harddrive from parking in case of minor regular shocks such as occur when in a train or car.)
The measurements are physically performed by an Analog Devices ADXL320 accelerometer chip, managed by the embedded controller.

• Command-Interpreter System

Command interpreter system in an I/O controller
United States Patent 5931920

A hardware accelerated I/O data processing engine to execute a minimum number of types of I/O data processing commands in response to a stimulus from a host computer. The data processing engine, referred to as a command interpreter includes a command queue, a logic unit, a multiple purpose interface, at least one memory, and a controlling state machine, that each operate in concert with each other and without software control. The types of commands executed by the command interpreter can include, but are not limited to, an Initialize, Copy, DMA Read, DMA Write, Cumulative Exclusive OR, Verify, Compare, and ECC Check. The execution of commands that specify a source data location and a destination data location are characterized by a plurality of reads to an internal cache from the source data location for each bulk write from the internal cache to the destination data location. The locations of the data operated on by the command interpreter include a local I/O controller memory and a non-local I/O controller memory accessible to the command interpreter by way of an I/O bus.